HWA Accepts: |
|
|
|
|
|
|
All weather
protection using film barrier technology |
|
NOAH® barrier
fabric actually stops water, yet it "breathes" to allow
any trapped moisture, seam seepage or condensation to easily evaporate.
The unique patented construction process results in a cover with
maximum all-weather protection...highly water resistant, dust resistant,
UV resistant and breathable to make sure moisture and/or heat don't
stay under the cover. The NOAH® fabric is made by Kimberly-Clark,
the fabric weighs only 4.45 oz./sq. yd., so easy to handle
and fold. Made
in USA! |
|
|
Protective Outer Layers: A bi-component spunbond,
using sheath-core technology. The inner core is polypropylene for
strength, with a polyethylene wrap for softness. A silver-gray
color was selected because of its heat-
resistant properties. The fabric
is also treated with UV inhibitors for extended outdoor use.
Micro-Porous Middle Layer: The barrier layer is breathable
film, a proprietary stretch-film technology developed exclusively
for Kimberly-Clark. The film is stretched and subjected to a chemical
process that creates
|
microscopic
holes smaller than droplets of water or dust, yet large enough to
allow moisture vapor to escape. |
|
Soft, Paint-Protecting Inner Layer -
A bi-component fabric made with polyethylene and nylon. This
combination results in an exceptionally high strength-to-weight
ratio, with the "soft touch" necessary for today's water-based
paint finishes. |
|
Construction: High-tech,
bonded 4-layer composite uses bi-component sheath core technology
for twin spunbond outer layers, a film barrier, and a soft bi-component
spunbond inner layer. |
|
Order
Your NOAH® Cover Here |
|
|