WeatherShield HP Two Tone Color Covers, WeatherShield HP Two Colored Car Covers, Custom Two-Tone WeatherShield HP Car Covers, Custom Weathershield Car Covers

HOME

PRODUCTS

POLICY

SPECIALS

CONTACT

HWA Accepts:

	Maximum Protection Indoors & Outdoors! The best high-performance automotive fabric ever offered. Now available in two-tone colors.

Now you can pick your favorite color for the "deck" (hood, roof, trunk) and another color for the sides to customize your custom cover. Choose from eight great colors and be creative.

	WeatherShield®, uses a patented immersion process that uses heat and pressure to permanently encapsulate the fibers of the fabric to shed moisture and block dust, dirt, bird droppings, tree sap and grime. This encapsulation process places an ultra-thin coating around the fabric fibers and at the same time creates a durable, breathable barrier within the woven polyester fabric to complete the high performance finish process. Unlike traditional coatings and laminations that just protect one
side of the fabric. WeatherShield® places long-lasting protective formulas inside the fabric.

The result is a fabric that provides maximum protection, but isn't bulky and hard to store. Using this immersion encapsulation technology we've created the ultimate car cover...and we named it WeatherShield because no other fabric has ever shielded your car or truck from the outside elements like this one.

	This magnified photo gives you an idea how the immersion encapsulation coats the fibers and fills the voids between the threads with a breathable barrier to assure any moisture that does get under the cover (or heat on a hot summer day) can easily escape through the fabric. During evaporation moisture turns into vapor and the vapor is smaller than water droplets so it easily transfers through the fabric. The base, high-strength, polyester fabric is naturally
UV resistant, but we've added UV inhibitors to the polymers to help slow-down the degradation that occurs naturally on anything exposed to sun for an extended period of time.

WeatherShield™ Cover Features:

Weatherproof: Fabric sheds water as soon as it hits the cover.
Breathable: Allows any heat or condensation under the cover to easily escape.
Superior Dry Time: Because the fabric sheds moisture it has an absorption factor of only 2%,      compared with up to 40% for standard woven and non-woven fabrics. That means, if the cover has
     been sitting out in the rain you only need to shake it and the residue moisture will easily dry, in
     the trunk or on the car.

Breathable: Allows any heat or condensation under the cover to easily escape.

UV Resistant: Special additives prevent UV degradation and protect the vehicles finish and interior.

Dust-Proof: Patented fiber encapsulation process prevents dust from filtering through the fabric.

Scratch-Less: Polymers provide a silky smooth finish to the fabric and provide superior paint protection. Nextec® fabric has been tested at 1,000 cycles on abrasion wheels without scratching (surface must be clean and waxed).

Durable: The encapsulation process is not affected by heat or cold and the process won't degrade over the life of the fabric.

Easy Care: Unlike non-woven fabrics you can clean most car-size WeatherShield™ covers in your HOME washer and dryer.

Material Colors Available: Gray, Taupe, Black, Bright Blue, Red.

Warranty: A four (4) year manufacturer warranty comes with cover.

Construction: Durable woven polyester with patented polymer solution finish.

Outdoor Use: Best.

Indoor Use: Best.

Car Covers Colors

Here are the five (5) WeatherShield colors offered


Black PB	Gray PG	Bright Blue PA	Red PR	Taupe PT

NOTICE REGARDING DARK & BRIGHT COLORS OF WEATHERSHIELD® FABRIC
We do not recommend to use a bright color WeatherShield fabric on light color surfaces.
"Crocking" is a fabric industry term for color transfer of dyes from a fabric to another surface. Each dye-lot of WeatherShield fabric is tested for both wet and dry crocking and certified to AATCC Test Standard ratings of 4 or higher (out of 5) for resistance to crocking. But even with continuous testing there's still a possibility that bright colors (red, green, blue, black & yellow) can transfer color dye when rubbed against light color surfaces.

WeatherShield Cover Options

Reflective Welting Option (Custom Covers Only): This new custom cover option provides nighttime safety, vision and makes a cover look cool in the dark. Reflective Welting (piping) uses 500 candle-power to glow in the darkness of your garage and is sewn into both silhouette side seems that goes the full length from the front to the rear of the whole cover. (prices vary by cover size)		Custom Cover Embroidery (Custom Covers Only): Custom covers can be personalized with embroidered initials, monograms or lettering. Letters are 2¼" tall with approximately seven (7) characters per line. Only three (3) embroidery lines are permitted. Thread color can be changed for each line, but cannot be changed in the middle of a line. Available thread colors: Black, Royal Blue, Gray, White and Red.

Deluxe Cable & Lock Kit (Use For All Covers): Works on any brand of cover. Kit includes vinyl-coated steel cable, padlock, non-scratch plastic snap-together grommets and iron-on reinforcing patches.		Car Cover Storage Bag (Use For All Covers): Polycotton duffel bag with drawstring helps keep cover neat and clean when not in use. Can be used with any style cover. (specify cover material and color).

Order Your WeatherShield®HP Cover Here

If you have any product questions call 410-902-9770.

[Home] [Products] [Policy] [Specials] [Contact]