HW Accessories LLC
car bras picture graphic
SEMA MEMBER - Specialty Equipment Market Association
HWA Accepts:
 
Custom Weathershield HP Car Cover
 
Custom Car Covers
 
Maximum Protection for Indoors & Outdoors!
The best high-performance automotive fabric ever made.
 
Click on these links to quickly browse this page.
 
 

The Custom Weathshield®HP Car Cover is specially made to provide better UV resistant, superior drying time, breathable, dust proof, scratchless, durable and weatherproof for the vehicle's exterior and interior. This next generation Weathershield®HP vehicle cover is new and improved to provide the strongest all-weather protection from bird droppings, tree sap, moisture, dust and dirt from ruining any vehicle's painted surface. The worldwide patented EPIC by Nextec® finish helps shed moisture and stops dust, dirt and tree sap from reaching the vehicle's exterior finish. The Weathershield®HP material "breathes" to allow moisture, condensation and heat to easily escape from under the cover. The encapsulation technology goes INSIDE the fabric, around the fibers, resulting in a silky smooth finish that glides over fine painted finishes.

Nextec engineers have now combined solution-dyed fibers to the EPIC finish in an environmentally friendly process that features much lower CO2 emissions! Also called "dope-dyeing" the high-performance polyamide fibers require no dyeing after weaving, saving water and energy consumption & slashing wastewater, a byproduct of traditional surface dye processing. Using solution-dyed fibers can save as much as 1,000 gallons of water for every 1,000 yards of fabric produced!

Color permanency is the key to our new WeatherShield®HP - the color is extruded INSIDE the fibers for maximum fade resistance, NOT a surface dye coating. The result is a cover that provides all-weather protection, machine washable, fade resistant AND environmentally friendly!

There are eight (8) WeatherShield®HP colors offered that can be ordered in single or two tone color combinations.    Made in USA

 
This magnified photo gives you an idea how the immersion encapsulation coats the fibers and fills the voids between the threads with a breathable barrier to assure any moisture that does get under the cover (or heat on a hot summer day) can easily escape through the fabric. During evaporation moisture turns into vapor and the vapor is smaller than water droplets so it easily transfers through the fabric. The base, high-strength, polyester fabric is naturally UV resistant, but we've added UV inhibitors to the polymers to help slow-down the degradation that occurs naturally on anything exposed to sun for an extended period of time.
 
WeatherShield®HP Cover Features:
 Weatherproof: Fabric sheds water as soon as it hits the cover.
 Breathable: Allows any heat or condensation under the cover to easily escape.
 Superior Dry Time: Because the fabric sheds moisture it has an absorption factor of only 2%,      compared with up to 40% for standard woven and non-woven fabrics. That means, if the cover has
     been sitting out in the rain you only need to shake it and the residue moisture will easily dry, in
     the trunk or on the car.
 Breathable: Allows any heat or condensation under the cover to easily escape.
 UV Resistant: Special additives prevent UV degradation and protect the vehicles finish and interior.
 Dust-Proof: Patented fiber encapsulation process prevents dust from filtering through the fabric.
 Scratch-Less: Polymers provide a silky smooth finish to the fabric and provide superior paint      protection. Nextec® fabric has been tested at 1,000 cycles on abrasion wheels without scratching      (surface must be clean and waxed).
 Durable: The encapsulation process is not affected by heat or cold and the process won't degrade      over the life of the fabric.
 Easy Care: Unlike non-woven fabrics you can clean most car-size WeatherShield®HP covers in      your home washer and dryer.
 Material Colors Available: Gray, Taupe, Black, Bright Blue, Red.
 Warranty: A four (4) year manufacturer warranty comes with cover.
 Construction: Durable woven polyester with patented polymer solution finish.
 Outdoor Use: Best.
 Indoor Use: Best.
 
 Packs Small & Light: This lightweight, all-weather,  one layer cover can easily be  packed into a 1/4 to 1/2 the
 size smaller than other
 covers. Very minimal
 storage space needed.
Waterproof: Encapsulation  process assures fabric sheds  water as soon as it water hits  the  cover.  Enlarge Image
 
Here are some details on certain parts of a car cover
All seams are overlapped and double stitched for durability. Enlarge Image
Neoprene elastic is sewn into the front and rear hems to provide a
snug fit. Enlarge Image
Reinforced, non-scratch tie down grommets are installed for use during extended storage or windy conditions. Enlarge Image
 
Car Covers Colors
 
Here are the five (5) WeatherShield®HP colors offered
Black PB
Gray PG
Bright Blue PA
Red PR
Taupe PT
 
NOTICE REGARDING COLOR CROCKING & FADING OF WEATHERSHIELD®HP FABRIC
The new and improved Weathershield®HP covers are colored by a process called "solution dyed" and
"Dope Dying" does not allow any more "Crocking" and zero to no fading. "Solution Dyed" means the color is extruded inside each fiber of the material for maximum fade resistance, NOT a surface dye coating. "Crocking" is a fabric industry term means color transfer of dyes from a fabric to another surface. 
 
WeatherShield®HP Cover Options
 
  Reflective Piping  (Custom Covers  Only): The reflective  welting (piping) option  offered for custom  covers only. The reflective welting option provides nighttime safety, visibility and makes a cover look cool in the dark. Reflective Welting (piping) uses 500 candle-power to glow in dark garages and is sewn into both silhouette side seems that go the full length from the front to the rear of the whole cover. (prices vary by cover size)
  Embroidery Option  (Custom Covers Only):  The embroidery option is  for custom covers only.  Custom covers can be  personalized with  embroidered initials, logos  or lettering to give the cover a fancy look. Letters are 2¼" tall and seven (7) characters per line. Only three (3) embroidery lines are permitted. Thread color can be changed for each line, but cannot be changed in the middle of a line. Six (6) thread colors offered. (extra cost)
 
  Deluxe Cable & Lock Kit  (Use For All Covers): The  cable and lock kit offered for  any cover. This kit secures  cover to vehicle from blowing  away. This Kit includes a vinyl-coated steel cable, padlock, non-scratch plastic snap-together grommets and iron-on reinforcing patches.
  Car Cover Storage Bags  (Use For All Covers):  Cover  tote bags and storage bag  help keep cover neat and  clean when not in use.  Can be used with any cover. (specify cover material and color).
 
 
 
Order Your WeatherShield®HP Cover Here
 
Click on order form button to place an order.
 
 
If you have any product questions call 410-902-9770.
[Home] [Products] [Policy] [Specials] [Contact]
Copyright © 2002 - HW Accessories LLC