HWA Accepts: |
|
|
|
|
Original Outdoor Motorcycle Capsule |
|
The
best way to protect your favorite ride from corrosion,
mildew, dings, dents, scratches, dust, pets and children! |
|
|
|
Motorcycle Capsule:
The Outdoor Motorcycle Capsule encapsulates and protects a motorcycle 24/7-365 days a year from harsh outdoor conditions only. The Outdoor Motorcycle Capsule is not clear, no see-thru vinyl, inflatable bubble provide 100% privacy, no visibility and can't see the bike stored inside the capsule. This Bike Capsule is made for outdoor use only, in bike shops, garages or storage facilities. If a garage or a car port is not available, the outdoor capsule is the next best storage solution to protect a bike outdoors. A bike is stored in a dust free, dry; sterile, climate and pristine enclosed environment. Motorcycles are protected from dust, dirt, blowing debris, moisture, corrosion, mildew, musty odors, insects, prying fingers, dents & dings, scratches, garage accidents, kids, pets, rodents, etc. The motorcycle capsule maintains that “showroom shine” all-year-round for a bike stored inside. The top cover is 100% PVC (vinyl), is 0.45mm thick, UV rated, not clear and not see-thru, provide 100% privacy, has hot air welded and anti-static seams for strength and durability. The heavy-duty PVC (vinyl) base mat is 0.45mm thick, for durability and strength, is mildew, abrasion, flame resistant, and also impervious to oil, diesel, gas, and antifreeze. The one washable charcoal air filter constantly filters out dust, dirt and insects from the airflow to keep pure air inside the motorcycle capsule. The one 190 High Pressure CFM @ 4200 RPM, dual ball bearing fan provides continuous and circulating filtered airflow. The heavy-duty, rust free, self-healing 100% nylon coil zipper prevent scratching the bike's painted surface, close and seal capsule, keep pure air inside, and keep rodents out. The dual fan system is powered by a 12 Volt, 2 Amp, dual voltage, water resistant power supply; 115VAC standard outlet USA; (240VAC Int'l). There are four (4) steel D-rings to tether and secure Bike Capsule to the ground and prevent unnecessary movement. The Outdoor BikeCapsule is "Cold-Crack" tested to withstand the coldest temperature is -30 degrees F and the hottest temperature is 158 degrees F. There are No metal parts inside, No metal frame and No bare metal used to make the capsule. The Outdoor BikeCapsule is compact and portable to another outdoor storage location. Use the Intellicharge battery charger and backup power system to maintain the bike's battery and the capsule during a power outage (sold separately). A 12 gauge extension cord can be used, if needed. Takes 2 minutes to fully setup and inflate the bike bubble. Easy setup, park bike onto base mat, attach fan, zip it up, and plug fan in. Two (2) capsule lengths offered 9ft. and 12ft. One year manufacturer warranty offered against defects with workmanship and materials. |
|
|
|
Strong Protective Bubble!
The vinyl bubble is strong and durable enough to protect any motorcycle inside the bike capsule while inflated, if a 5lb. - 25lb. item fell onto the capsule the item will bounce off. |
|
Air Filter
The single washable charcoal air filter, provide better air filtration, constantly filter the airflow, allow pure air to enter into the capsule without dirt, dust and insects.
Wash: Wash the air filter with mild dawn dishwashing detergent and water mixture, use clean towel to wipe off contaminants, thoroughly rise with water and then air dry. |
|
|
|
Power
Source
The 12 Volt, 2 Amp, dual voltage, water resistant power supply; 115VAC standard outlet; (240VAC Int’l) provide power to the dual fans system to keep the fans running. |
|
Fan System
The 12 volt high pressure 190 CFM single fan system at 4200 RPM provide continuous filtered airflow, constantly circulate the airflow inside and inflate the capsule. The rugged, heavy duty fan operates for less than $1.50/month. |
|
|
|
Clean and Maintain
To properly clean and maintain the BikeCapsule, use the California Car Duster to dust off the outside. Hand clean, using windex or mild Dawn dishwashing liguid soap and warm water mixture with paper towels or a clean, soft, white, cotton clothe to wipe off the outside and inside, rinse thoroughly with water, then air dry or dry with clean cotton clothe before using. Also, use a garment steamer to remove the wrinkles out of the clear and black PVC vinyl surfaces for wrinkle free vinyl to be presentable. The steamer can touch the vinyl without damaging the PVC. Wipe off water with a clean cotton towel. |
|
Evaporative Storage Technology (E.S.T.)
The Evaporative Storage Technology (E.S.T.) keeps the bike dry by changing the air inside the capsule 3 - 4 times per hour, and prevents moisture from condensing onto the bike. The constant airflow and circulation prevents corrosion, mildew and awful musty interior odors. The temperature inside the bubble remains consistent and always equal. The air filter and fan create the E.S.T. |
|
|
|
IntelliCharge
The IntelliCharge is an all-in-one battery charger and power backup system. The IntelliCharge maintains the bike's battery and a backup power source for the capsule's inflation and air circulation fan(s) to keep the BikeCapsule inflated during a power outage. The IntelliCharge ensures that the high power 190CFM fan, that is the key factor of the E.S.T. (Evaporative Storage Technology), promotes continuous airflow go uninterrupted for 30 - 40 Hrs. depending on battery size, (capacities vary) in case of a power outage. Once the power resumes the charger will revert back to maintaining the bike's battery. The IntelliCharge will continue to power and inflate the BikeCapsule until your battery reaches the lowest cranking amperage 12.2 volts, and then stop drawing power for the fan, and save that power to start the bike; now that’s an intelligent charger. The IntelliCharge works on all Original BikeCapsule models all the way up to the current indoor single panel models. This is a dual voltage 110/240 single fan unit. Single Fan Models Only. Charger sold seperately. |
|
Outdoor Motorcycle Capsule Accessories |
|
Single Fan Panel |
|
110 Volt Transformer (U.S.) |
|
Replacement Filter |
|
|
|
|
|
|
CarCapsule Warranty & Guarantee |
|
The CarCapsule is guaranteed for one year against all defects in workmanship and materials. Repair or replacement will be made upon receipt of product by CarCapsule USA freight prepaid. Using the CarCapsule outdoors will void all warranties. Please contact the place of purchase prior to shipping for warranty work.
THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN WITH RESPECT TO THE PRODUCT AND ALL OTHER EXPRESS WARRANTIES ARE HEREBY EXCLUDED, INCLUDING THE WARRANTY OF IMPLIED MERCHANTABILITY. NEITHER CARCAPSULE USA NOR AN AUTHORIZED CARCAPSULE PRODUCT DEALER WHO SELLS THE PRODUCTS IS RESPONSIBLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION ON IMPLIED WARRANTIES AND/OR THE LIMITATION OR EXCLUSION OF CERTAIN DAMAGES MAY NOT APPLY TO YOU.
|
|
Order
Your Outdoor Motorcycle Capsule Here |
|